Token smart contract
Pollchain aims for a multi-chain method, also known as a multi-blockchain. If Pollchain uses a single public blockchain such as Ethereum, there may be many restrictions in building and expanding the Pollchain system. Therefore, Pollchain intends to operate the Dapps developed by Pollchain on independent networks using various public blockchains that support the Solidity language. This multi-chain structure not only greatly increases the scalability of Pollchain, but also allows an infinite number of DApps to operate simultaneously. Therefore, the burden on the main chain is reduced, so there is no transaction overload. The burden of fees due to network congestion is also greatly reduced.
According to this development plan, POLL will issue 5 billion on the Binance Smart Chain and 1 billion on the Ethereum chain. The remaining 4 billion unissued will be issued on other chains as needed, but this process will be carried out through community governance. Pollchain also plans to develop a bridge to provide developers and users with inter-chain linkage and swaps.
Pollchain token has completed a code audit through Haechi labs(https://haechi.io/)
Contract Source Code
https://etherscan.io/token/0x4b0f027d0b694aae2761ed2d426295d4f949f5d0#code
/**
*Submitted for verification at Etherscan.io on 2021-08-07
*/
pragma solidity ^0.5.0;
library SafeMath {
/**
* @dev Multiplies two unsigned integers, reverts on overflow.
*/
function mul(uint256 a, uint256 b) internal pure returns (uint256) {
// Gas optimization: this is cheaper than requiring 'a' not being zero, but the
// benefit is lost if 'b' is also tested.
// See: https://github.com/OpenZeppelin/openzeppelin-solidity/pull/522
if (a == 0) {
return 0;
}
uint256 c = a * b;
require(c / a == b);
return c;
}
/**
* @dev Integer division of two unsigned integers truncating the quotient, reverts on division by zero.
*/
function div(uint256 a, uint256 b) internal pure returns (uint256) {
// Solidity only automatically asserts when dividing by 0
require(b > 0);
uint256 c = a / b;
// assert(a == b * c + a % b); // There is no case in which this doesn't hold
return c;
}
/**
* @dev Subtracts two unsigned integers, reverts on overflow (i.e. if subtrahend is greater than minuend).
*/
function sub(uint256 a, uint256 b) internal pure returns (uint256) {
require(b <= a);
uint256 c = a - b;
return c;
}
/**
* @dev Adds two unsigned integers, reverts on overflow.
*/
function add(uint256 a, uint256 b) internal pure returns (uint256) {
uint256 c = a + b;
require(c >= a);
return c;
}
/**
* @dev Divides two unsigned integers and returns the remainder (unsigned integer modulo),
* reverts when dividing by zero.
*/
function mod(uint256 a, uint256 b) internal pure returns (uint256) {
require(b != 0);
return a % b;
}
}
library Roles {
struct Role {
mapping (address => bool) bearer;
}
/**
* @dev give an account access to this role
*/
function add(Role storage role, address account) internal {
require(account != address(0));
require(!has(role, account));
role.bearer[account] = true;
}
/**
* @dev remove an account's access to this role
*/
function remove(Role storage role, address account) internal {
require(account != address(0));
require(has(role, account));
role.bearer[account] = false;
}
/**
* @dev check if an account has this role
* @return bool
*/
function has(Role storage role, address account) internal view returns (bool) {
require(account != address(0));
return role.bearer[account];
}
}
contract Ownable {
address public owner;
address public newOwner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor() public {
owner = msg.sender;
newOwner = address(0);
}
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
modifier onlyNewOwner() {
require(msg.sender != address(0));
require(msg.sender == newOwner);
_;
}
function isOwner(address account) public view returns (bool) {
if( account == owner ){
return true;
}
else {
return false;
}
}
function transferOwnership(address _newOwner) public onlyOwner {
require(_newOwner != address(0));
newOwner = _newOwner;
}
function acceptOwnership() public onlyNewOwner returns(bool) {
emit OwnershipTransferred(owner, newOwner);
owner = newOwner;
newOwner = address(0);
}
}
contract PauserRole is Ownable{
using Roles for Roles.Role;
event PauserAdded(address indexed account);
event PauserRemoved(address indexed account);
Roles.Role private _pausers;
constructor () internal {
_addPauser(msg.sender);
}
modifier onlyPauser() {
require(isPauser(msg.sender)|| isOwner(msg.sender));
_;
}
function isPauser(address account) public view returns (bool) {
return _pausers.has(account);
}
function addPauser(address account) public onlyPauser {
_addPauser(account);
}
function removePauser(address account) public onlyOwner {
_removePauser(account);
}
function renouncePauser() public {
_removePauser(msg.sender);
}
function _addPauser(address account) internal {
_pausers.add(account);
emit PauserAdded(account);
}
function _removePauser(address account) internal {
_pausers.remove(account);
emit PauserRemoved(account);
}
}
contract Pausable is PauserRole {
event Paused(address account);
event Unpaused(address account);
bool private _paused;
constructor () internal {
_paused = false;
}
/**
* @return true if the contract is paused, false otherwise.
*/
function paused() public view returns (bool) {
return _paused;
}
/**
* @dev Modifier to make a function callable only when the contract is not paused.
*/
modifier whenNotPaused() {
require(!_paused);
_;
}
/**
* @dev Modifier to make a function callable only when the contract is paused.
*/
modifier whenPaused() {
require(_paused);
_;
}
/**
* @dev called by the owner to pause, triggers stopped state
*/
function pause() public onlyPauser whenNotPaused {
_paused = true;
emit Paused(msg.sender);
}
/**
* @dev called by the owner to unpause, returns to normal state
*/
function unpause() public onlyPauser whenPaused {
_paused = false;
emit Unpaused(msg.sender);
}
}
interface IERC20 {
function transfer(address to, uint256 value) external returns (bool);
function approve(address spender, uint256 value) external returns (bool);
function transferFrom(address from, address to, uint256 value) external returns (bool);
function totalSupply() external view returns (uint256);
function balanceOf(address who) external view returns (uint256);
function allowance(address owner, address spender) external view returns (uint256);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);
}
contract ERC20 is IERC20 {
using SafeMath for uint256;
mapping (address => uint256) internal _balances;
mapping (address => mapping (address => uint256)) internal _allowed;
uint256 private _totalSupply;
/**
* @dev Total number of tokens in existence
*/
function totalSupply() public view returns (uint256) {
return _totalSupply;
}
/**
* @dev Gets the balance of the specified address.
* @param owner The address to query the balance of.
* @return An uint256 representing the amount owned by the passed address.
*/
function balanceOf(address owner) public view returns (uint256) {
return _balances[owner];
}
/**
* @dev Function to check the amount of tokens that an owner allowed to a spender.
* @param owner address The address which owns the funds.
* @param spender address The address which will spend the funds.
* @return A uint256 specifying the amount of tokens still available for the spender.
*/
function allowance(address owner, address spender) public view returns (uint256) {
return _allowed[owner][spender];
}
/**
* @dev Transfer token for a specified address
* @param to The address to transfer to.
* @param value The amount to be transferred.
*/
function transfer(address to, uint256 value) public returns (bool) {
_transfer(msg.sender, to, value);
return true;
}
/**
* @dev Approve the passed address to spend the specified amount of tokens on behalf of msg.sender.
* Beware that changing an allowance with this method brings the risk that someone may use both the old
* and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this
* race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
* @param spender The address which will spend the funds.
* @param value The amount of tokens to be spent.
*/
function approve(address spender, uint256 value) public returns (bool) {
require(spender != address(0));
_allowed[msg.sender][spender] = value;
emit Approval(msg.sender, spender, value);
return true;
}
/**
* @dev Transfer tokens from one address to another.
* Note that while this function emits an Approval event, this is not required as per the specification,
* and other compliant implementations may not emit the event.
* @param from address The address which you want to send tokens from
* @param to address The address which you want to transfer to
* @param value uint256 the amount of tokens to be transferred
*/
function transferFrom(address from, address to, uint256 value) public returns (bool) {
_allowed[from][msg.sender] = _allowed[from][msg.sender].sub(value);
_transfer(from, to, value);
emit Approval(from, msg.sender, _allowed[from][msg.sender]);
return true;
}
/**
* @dev Increase the amount of tokens that an owner allowed to a spender.
* approve should be called when allowed_[_spender] == 0. To increment
* allowed value is better to use this function to avoid 2 calls (and wait until
* the first transaction is mined)
* From MonolithDAO Token.sol
* Emits an Approval event.
* @param spender The address which will spend the funds.
* @param addedValue The amount of tokens to increase the allowance by.
*/
function increaseAllowance(address spender, uint256 addedValue) public returns (bool) {
require(spender != address(0));
_allowed[msg.sender][spender] = _allowed[msg.sender][spender].add(addedValue);
emit Approval(msg.sender, spender, _allowed[msg.sender][spender]);
return true;
}
/**
* @dev Decrease the amount of tokens that an owner allowed to a spender.
* approve should be called when allowed_[_spender] == 0. To decrement
* allowed value is better to use this function to avoid 2 calls (and wait until
* the first transaction is mined)
* From MonolithDAO Token.sol
* Emits an Approval event.
* @param spender The address which will spend the funds.
* @param subtractedValue The amount of tokens to decrease the allowance by.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public returns (bool) {
require(spender != address(0));
_allowed[msg.sender][spender] = _allowed[msg.sender][spender].sub(subtractedValue);
emit Approval(msg.sender, spender, _allowed[msg.sender][spender]);
return true;
}
/**
* @dev Transfer token for a specified addresses
* @param from The address to transfer from.
* @param to The address to transfer to.
* @param value The amount to be transferred.
*/
function _transfer(address from, address to, uint256 value) internal {
require(to != address(0));
_balances[from] = _balances[from].sub(value);
_balances[to] = _balances[to].add(value);
emit Transfer(from, to, value);
}
/**
* @dev Internal function that mints an amount of the token and assigns it to
* an account. This encapsulates the modification of balances such that the
* proper events are emitted.
* @param account The account that will receive the created tokens.
* @param value The amount that will be created.
*/
function _mint(address account, uint256 value) internal {
require(account != address(0));
_totalSupply = _totalSupply.add(value);
_balances[account] = _balances[account].add(value);
emit Transfer(address(0), account, value);
}
/**
* @dev Internal function that burns an amount of the token of a given
* account.
* @param account The account whose tokens will be burnt.
* @param value The amount that will be burnt.
*/
function _burn(address account, uint256 value) internal {
require(account != address(0));
_totalSupply = _totalSupply.sub(value);
_balances[account] = _balances[account].sub(value);
emit Transfer(account, address(0), value);
}
/**
* @dev Internal function that burns an amount of the token of a given
* account, deducting from the sender's allowance for said account. Uses the
* internal burn function.
* Emits an Approval event (reflecting the reduced allowance).
* @param account The account whose tokens will be burnt.
* @param value The amount that will be burnt.
*/
function _burnFrom(address account, uint256 value) internal {
_allowed[account][msg.sender] = _allowed[account][msg.sender].sub(value);
_burn(account, value);
emit Approval(account, msg.sender, _allowed[account][msg.sender]);
}
}
contract ERC20Pausable is ERC20, Pausable {
function transfer(address to, uint256 value) public whenNotPaused returns (bool) {
return super.transfer(to, value);
}
function transferFrom(address from, address to, uint256 value) public whenNotPaused returns (bool) {
return super.transferFrom(from, to, value);
}
/*
* approve/increaseApprove/decreaseApprove can be set when Paused state
*/
/*
* function approve(address spender, uint256 value) public whenNotPaused returns (bool) {
* return super.approve(spender, value);
* }
*
* function increaseAllowance(address spender, uint addedValue) public whenNotPaused returns (bool success) {
* return super.increaseAllowance(spender, addedValue);
* }
*
* function decreaseAllowance(address spender, uint subtractedValue) public whenNotPaused returns (bool success) {
* return super.decreaseAllowance(spender, subtractedValue);
* }
*/
}
contract ERC20Detailed is IERC20 {
string private _name;
string private _symbol;
uint8 private _decimals;
constructor (string memory name, string memory symbol, uint8 decimals) public {
_name = name;
_symbol = symbol;
_decimals = decimals;
}
/**
* @return the name of the token.
*/
function name() public view returns (string memory) {
return _name;
}
/**
* @return the symbol of the token.
*/
function symbol() public view returns (string memory) {
return _symbol;
}
/**
* @return the number of decimals of the token.
*/
function decimals() public view returns (uint8) {
return _decimals;
}
}
contract POLL is ERC20Detailed, ERC20Pausable {
struct LockInfo {
uint256 _releaseTime;
uint256 _amount;
}
address public implementation;
mapping (address => LockInfo[]) public timelockList;
mapping (address => bool) public frozenAccount;
event Freeze(address indexed holder);
event Unfreeze(address indexed holder);
event Lock(address indexed holder, uint256 value, uint256 releaseTime);
event Unlock(address indexed holder, uint256 value);
modifier notFrozen(address _holder) {
require(!frozenAccount[_holder]);
_;
}
constructor() ERC20Detailed("POLLCHAIN", "POLL", 18) public {
_mint(msg.sender, 1000000000 * (10 ** 18));
}
function balanceOf(address owner) public view returns (uint256) {
uint256 totalBalance = super.balanceOf(owner);
if( timelockList[owner].length >0 ){
for(uint i=0; i<timelockList[owner].length;i++){
totalBalance = totalBalance.add(timelockList[owner][i]._amount);
}
}
return totalBalance;
}
function transfer(address to, uint256 value) public notFrozen(msg.sender) returns (bool) {
if (timelockList[msg.sender].length > 0 ) {
_autoUnlock(msg.sender);
}
return super.transfer(to, value);
}
function transferFrom(address from, address to, uint256 value) public notFrozen(from) returns (bool) {
if (timelockList[from].length > 0) {
_autoUnlock(from);
}
return super.transferFrom(from, to, value);
}
function freezeAccount(address holder) public onlyPauser returns (bool) {
require(!frozenAccount[holder]);
frozenAccount[holder] = true;
emit Freeze(holder);
return true;
}
function unfreezeAccount(address holder) public onlyPauser returns (bool) {
require(frozenAccount[holder]);
frozenAccount[holder] = false;
emit Unfreeze(holder);
return true;
}
function lock(address holder, uint256 value, uint256 releaseTime) public onlyPauser returns (bool) {
require(_balances[holder] >= value,"There is not enough balances of holder.");
_lock(holder,value,releaseTime);
return true;
}
function transferWithLock(address holder, uint256 value, uint256 releaseTime) public onlyPauser returns (bool) {
_transfer(msg.sender, holder, value);
_lock(holder,value,releaseTime);
return true;
}
function unlock(address holder, uint256 idx) public onlyPauser returns (bool) {
require( timelockList[holder].length > idx, "There is not lock info.");
_unlock(holder,idx);
return true;
}
/**
* @dev Upgrades the implementation address
* @param _newImplementation address of the new implementation
*/
function upgradeTo(address _newImplementation) public onlyOwner {
require(implementation != _newImplementation);
_setImplementation(_newImplementation);
}
function _lock(address holder, uint256 value, uint256 releaseTime) internal returns(bool) {
_balances[holder] = _balances[holder].sub(value);
timelockList[holder].push( LockInfo(releaseTime, value) );
emit Lock(holder, value, releaseTime);
return true;
}
function _unlock(address holder, uint256 idx) internal returns(bool) {
LockInfo storage lockinfo = timelockList[holder][idx];
uint256 releaseAmount = lockinfo._amount;
delete timelockList[holder][idx];
timelockList[holder][idx] = timelockList[holder][timelockList[holder].length.sub(1)];
timelockList[holder].length -=1;
emit Unlock(holder, releaseAmount);
_balances[holder] = _balances[holder].add(releaseAmount);
return true;
}
function _autoUnlock(address holder) internal returns(bool) {
for(uint256 idx =0; idx < timelockList[holder].length ; idx++ ) {
if (timelockList[holder][idx]._releaseTime <= now) {
// If lockupinfo was deleted, loop restart at same position.
if( _unlock(holder, idx) ) {
idx -=1;
}
}
}
return true;
}
/**
* @dev Sets the address of the current implementation
* @param _newImp address of the new implementation
*/
function _setImplementation(address _newImp) internal {
implementation = _newImp;
}
/**
* @dev Fallback function allowing to perform a delegatecall
* to the given implementation. This function will return
* whatever the implementation call returns
*/
function () payable external {
address impl = implementation;
require(impl != address(0));
assembly {
let ptr := mload(0x40)
calldatacopy(ptr, 0, calldatasize)
let result := delegatecall(gas, impl, ptr, calldatasize, 0, 0)
let size := returndatasize
returndatacopy(ptr, 0, size)
switch result
case 0 { revert(ptr, size) }
default { return(ptr, size) }
}
}
}}
library Roles { struct Role { mapping (address => bool) bearer; }
/**
* @dev give an account access to this role
*/
function add(Role storage role, address account) internal {
require(account != address(0));
require(!has(role, account));
role.bearer[account] = true;
}
/**
* @dev remove an account's access to this role
*/
function remove(Role storage role, address account) internal {
require(account != address(0));
require(has(role, account));
role.bearer[account] = false;
}
/**
* @dev check if an account has this role
* @return bool
*/
function has(Role storage role, address account) internal view returns (bool) {
require(account != address(0));
return role.bearer[account];
}}
contract Ownable { address public owner; address public newOwner;
event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
constructor() public {
owner = msg.sender;
newOwner = address(0);
}
modifier onlyOwner() {
require(msg.sender == owner);
_;
}
modifier onlyNewOwner() {
require(msg.sender != address(0));
require(msg.sender == newOwner);
_;
}
function isOwner(address account) public view returns (bool) {
if( account == owner ){
return true;
}
else {
return false;
}
}
function transferOwnership(address _newOwner) public onlyOwner {
require(_newOwner != address(0));
newOwner = _newOwner;
}
function acceptOwnership() public onlyNewOwner returns(bool) {
emit OwnershipTransferred(owner, newOwner);
owner = newOwner;
newOwner = address(0);
}}
contract PauserRole is Ownable{ using Roles for Roles.Role;
event PauserAdded(address indexed account);
event PauserRemoved(address indexed account);
Roles.Role private _pausers;
constructor () internal {
_addPauser(msg.sender);
}
modifier onlyPauser() {
require(isPauser(msg.sender)|| isOwner(msg.sender));
_;
}
function isPauser(address account) public view returns (bool) {
return _pausers.has(account);
}
function addPauser(address account) public onlyPauser {
_addPauser(account);
}
function removePauser(address account) public onlyOwner {
_removePauser(account);
}
function renouncePauser() public {
_removePauser(msg.sender);
}
function _addPauser(address account) internal {
_pausers.add(account);
emit PauserAdded(account);
}
function _removePauser(address account) internal {
_pausers.remove(account);
emit PauserRemoved(account);
}}
contract Pausable is PauserRole { event Paused(address account); event Unpaused(address account);
bool private _paused;
constructor () internal {
_paused = false;
}
/**
* @return true if the contract is paused, false otherwise.
*/
function paused() public view returns (bool) {
return _paused;
}
/**
* @dev Modifier to make a function callable only when the contract is not paused.
*/
modifier whenNotPaused() {
require(!_paused);
_;
}
/**
* @dev Modifier to make a function callable only when the contract is paused.
*/
modifier whenPaused() {
require(_paused);
_;
}
/**
* @dev called by the owner to pause, triggers stopped state
*/
function pause() public onlyPauser whenNotPaused {
_paused = true;
emit Paused(msg.sender);
}
/**
* @dev called by the owner to unpause, returns to normal state
*/
function unpause() public onlyPauser whenPaused {
_paused = false;
emit Unpaused(msg.sender);
}}
interface IERC20 { function transfer(address to, uint256 value) external returns (bool);
function approve(address spender, uint256 value) external returns (bool);
function transferFrom(address from, address to, uint256 value) external returns (bool);
function totalSupply() external view returns (uint256);
function balanceOf(address who) external view returns (uint256);
function allowance(address owner, address spender) external view returns (uint256);
event Transfer(address indexed from, address indexed to, uint256 value);
event Approval(address indexed owner, address indexed spender, uint256 value);}
contract ERC20 is IERC20 { using SafeMath for uint256;
mapping (address => uint256) internal _balances;
mapping (address => mapping (address => uint256)) internal _allowed;
uint256 private _totalSupply;
/**
* @dev Total number of tokens in existence
*/
function totalSupply() public view returns (uint256) {
return _totalSupply;
}
/**
* @dev Gets the balance of the specified address.
* @param owner The address to query the balance of.
* @return An uint256 representing the amount owned by the passed address.
*/
function balanceOf(address owner) public view returns (uint256) {
return _balances[owner];
}
/**
* @dev Function to check the amount of tokens that an owner allowed to a spender.
* @param owner address The address which owns the funds.
* @param spender address The address which will spend the funds.
* @return A uint256 specifying the amount of tokens still available for the spender.
*/
function allowance(address owner, address spender) public view returns (uint256) {
return _allowed[owner][spender];
}
/**
* @dev Transfer token for a specified address
* @param to The address to transfer to.
* @param value The amount to be transferred.
*/
function transfer(address to, uint256 value) public returns (bool) {
_transfer(msg.sender, to, value);
return true;
}
/**
* @dev Approve the passed address to spend the specified amount of tokens on behalf of msg.sender.
* Beware that changing an allowance with this method brings the risk that someone may use both the old
* and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this
* race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards:
* https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
* @param spender The address which will spend the funds.
* @param value The amount of tokens to be spent.
*/
function approve(address spender, uint256 value) public returns (bool) {
require(spender != address(0));
_allowed[msg.sender][spender] = value;
emit Approval(msg.sender, spender, value);
return true;
}
/**
* @dev Transfer tokens from one address to another.
* Note that while this function emits an Approval event, this is not required as per the specification,
* and other compliant implementations may not emit the event.
* @param from address The address which you want to send tokens from
* @param to address The address which you want to transfer to
* @param value uint256 the amount of tokens to be transferred
*/
function transferFrom(address from, address to, uint256 value) public returns (bool) {
_allowed[from][msg.sender] = _allowed[from][msg.sender].sub(value);
_transfer(from, to, value);
emit Approval(from, msg.sender, _allowed[from][msg.sender]);
return true;
}
/**
* @dev Increase the amount of tokens that an owner allowed to a spender.
* approve should be called when allowed_[_spender] == 0. To increment
* allowed value is better to use this function to avoid 2 calls (and wait until
* the first transaction is mined)
* From MonolithDAO Token.sol
* Emits an Approval event.
* @param spender The address which will spend the funds.
* @param addedValue The amount of tokens to increase the allowance by.
*/
function increaseAllowance(address spender, uint256 addedValue) public returns (bool) {
require(spender != address(0));
_allowed[msg.sender][spender] = _allowed[msg.sender][spender].add(addedValue);
emit Approval(msg.sender, spender, _allowed[msg.sender][spender]);
return true;
}
/**
* @dev Decrease the amount of tokens that an owner allowed to a spender.
* approve should be called when allowed_[_spender] == 0. To decrement
* allowed value is better to use this function to avoid 2 calls (and wait until
* the first transaction is mined)
* From MonolithDAO Token.sol
* Emits an Approval event.
* @param spender The address which will spend the funds.
* @param subtractedValue The amount of tokens to decrease the allowance by.
*/
function decreaseAllowance(address spender, uint256 subtractedValue) public returns (bool) {
require(spender != address(0));
_allowed[msg.sender][spender] = _allowed[msg.sender][spender].sub(subtractedValue);
emit Approval(msg.sender, spender, _allowed[msg.sender][spender]);
return true;
}
/**
* @dev Transfer token for a specified addresses
* @param from The address to transfer from.
* @param to The address to transfer to.
* @param value The amount to be transferred.
*/
function _transfer(address from, address to, uint256 value) internal {
require(to != address(0));
_balances[from] = _balances[from].sub(value);
_balances[to] = _balances[to].add(value);
emit Transfer(from, to, value);
}
/**
* @dev Internal function that mints an amount of the token and assigns it to
* an account. This encapsulates the modification of balances such that the
* proper events are emitted.
* @param account The account that will receive the created tokens.
* @param value The amount that will be created.
*/
function _mint(address account, uint256 value) internal {
require(account != address(0));
_totalSupply = _totalSupply.add(value);
_balances[account] = _balances[account].add(value);
emit Transfer(address(0), account, value);
}
/**
* @dev Internal function that burns an amount of the token of a given
* account.
* @param account The account whose tokens will be burnt.
* @param value The amount that will be burnt.
*/
function _burn(address account, uint256 value) internal {
require(account != address(0));
_totalSupply = _totalSupply.sub(value);
_balances[account] = _balances[account].sub(value);
emit Transfer(account, address(0), value);
}
/**
* @dev Internal function that burns an amount of the token of a given
* account, deducting from the sender's allowance for said account. Uses the
* internal burn function.
* Emits an Approval event (reflecting the reduced allowance).
* @param account The account whose tokens will be burnt.
* @param value The amount that will be burnt.
*/
function _burnFrom(address account, uint256 value) internal {
_allowed[account][msg.sender] = _allowed[account][msg.sender].sub(value);
_burn(account, value);
emit Approval(account, msg.sender, _allowed[account][msg.sender]);
}}
contract ERC20Pausable is ERC20, Pausable { function transfer(address to, uint256 value) public whenNotPaused returns (bool) { return super.transfer(to, value); }
function transferFrom(address from, address to, uint256 value) public whenNotPaused returns (bool) {
return super.transferFrom(from, to, value);
}
/*
* approve/increaseApprove/decreaseApprove can be set when Paused state
*/
/*
* function approve(address spender, uint256 value) public whenNotPaused returns (bool) {
* return super.approve(spender, value);
* }
*
* function increaseAllowance(address spender, uint addedValue) public whenNotPaused returns (bool success) {
* return super.increaseAllowance(spender, addedValue);
* }
*
* function decreaseAllowance(address spender, uint subtractedValue) public whenNotPaused returns (bool success) {
* return super.decreaseAllowance(spender, subtractedValue);
* }
*/}
contract ERC20Detailed is IERC20 { string private _name; string private _symbol; uint8 private _decimals;
constructor (string memory name, string memory symbol, uint8 decimals) public {
_name = name;
_symbol = symbol;
_decimals = decimals;
}
/**
* @return the name of the token.
*/
function name() public view returns (string memory) {
return _name;
}
/**
* @return the symbol of the token.
*/
function symbol() public view returns (string memory) {
return _symbol;
}
/**
* @return the number of decimals of the token.
*/
function decimals() public view returns (uint8) {
return _decimals;
}}
contract POLL is ERC20Detailed, ERC20Pausable {
struct LockInfo {
uint256 _releaseTime;
uint256 _amount;
}
address public implementation;
mapping (address => LockInfo[]) public timelockList;
mapping (address => bool) public frozenAccount;
event Freeze(address indexed holder);
event Unfreeze(address indexed holder);
event Lock(address indexed holder, uint256 value, uint256 releaseTime);
event Unlock(address indexed holder, uint256 value);
modifier notFrozen(address _holder) {
require(!frozenAccount[_holder]);
_;
}
constructor() ERC20Detailed("POLLCHAIN", "POLL", 18) public {
_mint(msg.sender, 1000000000 * (10 ** 18));
}
function balanceOf(address owner) public view returns (uint256) {
uint256 totalBalance = super.balanceOf(owner);
if( timelockList[owner].length >0 ){
for(uint i=0; i<timelockList[owner].length;i++){
totalBalance = totalBalance.add(timelockList[owner][i]._amount);
}
}
return totalBalance;
}
function transfer(address to, uint256 value) public notFrozen(msg.sender) returns (bool) {
if (timelockList[msg.sender].length > 0 ) {
_autoUnlock(msg.sender);
}
return super.transfer(to, value);
}
function transferFrom(address from, address to, uint256 value) public notFrozen(from) returns (bool) {
if (timelockList[from].length > 0) {
_autoUnlock(from);
}
return super.transferFrom(from, to, value);
}
function freezeAccount(address holder) public onlyPauser returns (bool) {
require(!frozenAccount[holder]);
frozenAccount[holder] = true;
emit Freeze(holder);
return true;
}
function unfreezeAccount(address holder) public onlyPauser returns (bool) {
require(frozenAccount[holder]);
frozenAccount[holder] = false;
emit Unfreeze(holder);
return true;
}
function lock(address holder, uint256 value, uint256 releaseTime) public onlyPauser returns (bool) {
require(_balances[holder] >= value,"There is not enough balances of holder.");
_lock(holder,value,releaseTime);
return true;
}
function transferWithLock(address holder, uint256 value, uint256 releaseTime) public onlyPauser returns (bool) {
_transfer(msg.sender, holder, value);
_lock(holder,value,releaseTime);
return true;
}
function unlock(address holder, uint256 idx) public onlyPauser returns (bool) {
require( timelockList[holder].length > idx, "There is not lock info.");
_unlock(holder,idx);
return true;
}
/**
* @dev Upgrades the implementation address
* @param _newImplementation address of the new implementation
*/
function upgradeTo(address _newImplementation) public onlyOwner {
require(implementation != _newImplementation);
_setImplementation(_newImplementation);
}
function _lock(address holder, uint256 value, uint256 releaseTime) internal returns(bool) {
_balances[holder] = _balances[holder].sub(value);
timelockList[holder].push( LockInfo(releaseTime, value) );
emit Lock(holder, value, releaseTime);
return true;
}
function _unlock(address holder, uint256 idx) internal returns(bool) {
LockInfo storage lockinfo = timelockList[holder][idx];
uint256 releaseAmount = lockinfo._amount;
delete timelockList[holder][idx];
timelockList[holder][idx] = timelockList[holder][timelockList[holder].length.sub(1)];
timelockList[holder].length -=1;
emit Unlock(holder, releaseAmount);
_balances[holder] = _balances[holder].add(releaseAmount);
return true;
}
function _autoUnlock(address holder) internal returns(bool) {
for(uint256 idx =0; idx < timelockList[holder].length ; idx++ ) {
if (timelockList[holder][idx]._releaseTime <= now) {
// If lockupinfo was deleted, loop restart at same position.
if( _unlock(holder, idx) ) {
idx -=1;
}
}
}
return true;
}
/**
* @dev Sets the address of the current implementation
* @param _newImp address of the new implementation
*/
function _setImplementation(address _newImp) internal {
implementation = _newImp;
}
/**
* @dev Fallback function allowing to perform a delegatecall
* to the given implementation. This function will return
* whatever the implementation call returns
*/
function () payable external {
address impl = implementation;
require(impl != address(0));
assembly {
let ptr := mload(0x40)
calldatacopy(ptr, 0, calldatasize)
let result := delegatecall(gas, impl, ptr, calldatasize, 0, 0)
let size := returndatasize
returndatacopy(ptr, 0, size)
switch result
case 0 { revert(ptr, size) }
default { return(ptr, size) }
}
}}
Last updated